PROEL PLML575SCN User Manual download pdf (Page 30)

REPLACING THE FUSE

If the lamp burns out, the fine-wire fuse of the device might fuse, too. Only replace the

fuse by a fuse of same type and rating.

Before replacing the fuse, unplug mains lead.

PROCEDURE:

1. remove the fuse holder on the rear panel with a fitting screwdriver from the housing

2. remove the old fuse from the fuse holder

3. install the new fuse in the fuse holder

4. replace the fuse holder in the housing and fix it

Should you need any spare parts, please use genuine parts.

If the power supply cable of this device becomes damaged, it has to be replaced by a

special power supply cable available at your dealer.

Should you have further questions, please contact your dealer.

TECHNICAL SPECIFICATIONS

Power supply

230V / 50Hz

(117V / 60Hz USA)

Power consumption

800W

DMX control channels

DMX 512 connection

3-pin XLR

Length

470 mm

Width

410 mm

Height

480 mm

Net weight

27 kg

Maximum ambient temperature

45 °C

Maximum housing temperature

90 °C

Min distance from flammable surfaces

1,5 m

Min distance from lighted object

1,5 m

Fuse

F5A, 250V

Please note: Every information is subject to change without prior notice.

1 2 ... 25 26 27 28 29 30 31 32 33

No comments

PROEL PLML575SCN User Manual Page 30